Adding A Belt Hole

Think I would like to take it to somebody who is skilled in doing it because the belt wasn't exactly low cost and don't want to wreck it. Follow on the very end (that you'll lower off later) to get a really feel for how the drill and Leather interact. Looks like the Tandy Leather website retailer has gone kaput, the belt blank and belt preserve links do not work any longer. Tom, Sadly it looks like this printed around the same time Tandy did a worth enhance on the belt blank. Tom: $7 balm + $1 preserve + $2 buckle + $19 belt clean = $29 - $10 from code = $19. I already have Sno Seal at house and wish to avoid buying the Leather Balm if it does the same factor.
Work the Leather up and down the opening to attempt to stretch it out a bit of as it will not be the very same size as the other holes that had been punched originally. Next we have to do away with the excess Leather on the finish so we do not seem like we now have a tail hanging out on the front of our pants. Once more I marked the place I felt applicable with a sharpie and simply used my household scissors to cut the Leather. Ensure it's trimmed and nice, and then high-stitch it in the same approach that you simply did your belt piece.

My dad taught me a fantastic trick when utilizing an axe to make a brand new Hole: Rigorously maintain the steel tip in an open stove flame for a minute or two, then fastidiously push it by way of the Leather. It's going to seal the opening to the proper dimension and maintain it from shrinking up. By the best way, I'm lady (yeah, hear me roar). I recently purchased an archery quiver, and even on the shortest setting, the Leather straps are nonetheless approach too long. After the drill bit penetrates the belt, move the drill up and all the way down to filter out the chaff from the sides of the opening.
It can come with snaps to carry the buckle on, so all we'll must do is trim the top to size, fit it for a Hole, and protect the Leather. Leather Balm with Atom Wax in Neutral, $6.99 The Leather that you're buying is untreated. If you want a coloured belt as an alternative of the pure color, you may replace this with water primarily based Leather dye. You should utilize a Leather punch to create the belt Hole, or if you do not have one, you possibly can fastidiously use an influence drill.

You want to try on the belt and get an thought for how much you have to to bring the belt in, one extra Hole is all i wanted for this one. Some belts have screws close to the buckle which you'll remove and relocate to shrink the belt. I haven't got a Leather Hole punch, so I just used a nail that I had and punched the opening a couple of times.
I am a woman and an artist and I recognize this DIY as a helpful instruction on how one can work with Leather. All things put aside, whether or not you are a feminist, a masculinist, a child, an artist, a novice, or no matter, this diy is helpful for learning find out how to make holes in Leather and Leather belts ;). My dad hasn't worked in Leather much, so he could not reply my questions. Thanks for the bit about sealing the outlet with a hot nail/awl, that'll make it look good. I once used a dental rubber dam punch to make an ideal further Hole in my belt utilizing the biggest size.
Turn the belt over and reduce off the Leather that has poked by on the other side utilizing a pointy knife. Use clear shoe polish to seal the within of the opening you have got created - a toothpick is helpful to use the polish to the sides. For an easier method of constructing a Hole, use a fundamental Leather Hole punch that may come with directions: you can pick these up for about £10. Disclosure: This put up accommodates affiliate links, which implies I'll obtain a share when you make a purchase order using these links. Leathercraft Nylon Hammer : You will use this to hammer your punches into the Leather.

Work the Leather up and down the opening to attempt to stretch it out a bit because it won't be the exact same measurement as the opposite holes that were punched originally. Subsequent we need to eliminate the surplus Leather on the end so we do not appear to be we've punch hole in belt a tail hanging out on the front of our pants. Once more I marked the place I felt appropriate with a sharpie and just used my family scissors to cut the Leather. Make sure that it is trimmed and good, and then top-sew it in the identical method that you just did your belt piece.
Well unless its an expensive belt and also you need to retain the integrity of the made Hole. You might also get one of many Leather punch from ebay and use it for different future Leather Hole making functions. If you decide to make use of a drill be sure to hold the belt down tight and safe, it would spin round real fast should you do not. I used to do use a Leather punch as a result of my belts have been at all times half a notch too big or half a notch too small.

Leave a Reply

Your email address will not be published. Required fields are marked *